High Carbon Iron Filamet 0.5kg NOTE THIS IS PLASTIC BASED

NOTE THIS IS PLASTIC BASED MATERIAL - NOT TO BE SINTERED

Optionally

60 Mesh Sieve 6" for separating your Virtual Foundry parts from ballast materials after debinding or sintering

What you'll need to print:* An FFF/FDM 3D printer* Stainless steel nozzle 0

High Carbon Iron Filamet 0.5kg NOTE THIS IS PLASTIC BASEDHigh Carbon Iron Filamet contains around 80% metal and enables any FFM Printer to produce metal objects. This filament is highly ferromagnetic both before and after sintering. 1. 75mm What you'll need to print; FDM FFF Printer Hardened Steel Nozzle 0. 8mm or 1. 0mm Blue painters tape for your print bed. What you'll need to debind and sinter; Sintering parameters for this material are currently in development Slicer Setup: Start with a basic PLA